SBCs for Embedded Networking: The DIL/NetPC Family
A DIL/NetPC family member provides a very compact 32-bit low power embedded system solution with TCP/IP protocol stack, socket-based API, HTTP, FTP and Telnet server for Ethernet- (IEEE 802.3), Bluetooth- (IEEE 802.15.1), LR-WPAN (IEEE 802.15.4/ZigBee), or WLAN/Wi-Fi-based (IEEE 802.11a/b/g) embedded networking and M2M applications.
All DIL/NetPC family members offers the footprint of a standard 40-pin DIL, 64-pin DIL, 128-pin QIL or 169-pin PGA socket with 2.54mm centers and all the hardware and software features necessary to add networking capabilities to any product design. The DIL/NetPC family was developed specifically for products that need to be connected to Ethernet-based networks with maximum performance and minimum development costs.
A DIL/NetPC family member is a ready-to-run programmable embedded networking system. The use of DIL/NetPCs will allow you to realize a substantial time and costs savings over other chip-based approaches. Currently, there is no other more flexible Ethernet- and TCP/IP-based embedded networking solution with more development time savings on the market. There is also no faster Time-to-Market for your product with lower costs if Ethernet, TCP/IP and a embedded web server with real CGI, SSI and many other features is required.
DIL/NetPCs Common Features
32-bit Low Power CISC or RISC CPU with up to 600 MHz
Up to 64 MByte SDRAM Memory
Up to 139 MByte NOR/NAND FLASH Memory with Boot Block
One or two 10/100 Mbps Ethernet Interfaces
One or two UART-based serial Ports with TTL Levels
18- or 20-Bit General Purpose Parallel I/O (PIO)
Software/Hardware CAN, I2S, SPI, TWI and I2C Support
Extension Bus with Interrupts and Chip Selects
Programmable Watchdog Timer
JTAG IEEE 1149.1 Boundary Scan Test Interface
In-System Programmable over JTAG, serial and Ethernet Interface
40-pin and 64-pin JEDEC DIL, 128-pin QIL, or 169-pin PGA Connectors with 2.54mm Centers
3.3 Volt Low Power Design
Size 55*23 mm (DIL-40), 82*28mm (DIL-64), 82*33mm/36mm (QIL-128) or 45*45mm (PGA-169)
Pre-installed Embedded Linux with full-featured TCP/IP and FTP/HTTP/Telnet/SSH Servers
eCos or Microsoft Windows CE O/S option for some DIL/NetPCs
All DIL/NetPC family members offers the footprint of a standard 40-pin DIL, 64-pin DIL, 128-pin QIL or 169-pin PGA socket with 2.54mm centers and all the hardware and software features necessary to add networking capabilities to any product design. The DIL/NetPC family was developed specifically for products that need to be connected to Ethernet-based networks with maximum performance and minimum development costs.
A DIL/NetPC family member is a ready-to-run programmable embedded networking system. The use of DIL/NetPCs will allow you to realize a substantial time and costs savings over other chip-based approaches. Currently, there is no other more flexible Ethernet- and TCP/IP-based embedded networking solution with more development time savings on the market. There is also no faster Time-to-Market for your product with lower costs if Ethernet, TCP/IP and a embedded web server with real CGI, SSI and many other features is required.
DIL/NetPCs Common Features
32-bit Low Power CISC or RISC CPU with up to 600 MHz
Up to 64 MByte SDRAM Memory
Up to 139 MByte NOR/NAND FLASH Memory with Boot Block
One or two 10/100 Mbps Ethernet Interfaces
One or two UART-based serial Ports with TTL Levels
18- or 20-Bit General Purpose Parallel I/O (PIO)
Software/Hardware CAN, I2S, SPI, TWI and I2C Support
Extension Bus with Interrupts and Chip Selects
Programmable Watchdog Timer
JTAG IEEE 1149.1 Boundary Scan Test Interface
In-System Programmable over JTAG, serial and Ethernet Interface
40-pin and 64-pin JEDEC DIL, 128-pin QIL, or 169-pin PGA Connectors with 2.54mm Centers
3.3 Volt Low Power Design
Size 55*23 mm (DIL-40), 82*28mm (DIL-64), 82*33mm/36mm (QIL-128) or 45*45mm (PGA-169)
Pre-installed Embedded Linux with full-featured TCP/IP and FTP/HTTP/Telnet/SSH Servers
eCos or Microsoft Windows CE O/S option for some DIL/NetPCs
Posts
No comments: