[Tsifrozerkalka] on the basis of iPhone?
The company Of apple in its new in iPhone I improved the built-in camera, but by certain it seemed a similar upgrade by insufficient. One of the enthusiasts, Jeremy El Salvador (Jeremy Of salvador) created the system of iPhone DSLR Of prototype 1.0, which it named an attempt at the combination of iPhone and [tsifrozerkalki]. Creator himself answered to a question about the need for a similar device: “And why not?” So that this [gadzhet] created precisely because of existence of the telephones of iPhone and objectives of digital specular cameras.
Of course there are no foundations for calling its system digital single-objective specular camera on the basis of the telephone of iPhone, since no mirror in the construction there is. Everything that assumes iPhone DSLR Of prototype 1.0 - this special block to which from one side it is fastened telephone iPhone (3G, 3Gs, 4), and with another - the objective from the reflex camera, whose optics serves for the image transmission to the matrix of the photographic module of telephone. At the present moment the only model of the objective - Canon EF used. Over the long term is possible the modification to the compatability with the objectives Of canon FD, Nikon and M42. Block for the fastening is made from anodized aluminum and weighs near [polukilogramma], and it is also equipped with four standard joints of 1/4 ″ - 20 female, which makes it possible to fasten entire construction to the usual support.
Of course there are no foundations for calling its system digital single-objective specular camera on the basis of the telephone of iPhone, since no mirror in the construction there is. Everything that assumes iPhone DSLR Of prototype 1.0 - this special block to which from one side it is fastened telephone iPhone (3G, 3Gs, 4), and with another - the objective from the reflex camera, whose optics serves for the image transmission to the matrix of the photographic module of telephone. At the present moment the only model of the objective - Canon EF used. Over the long term is possible the modification to the compatability with the objectives Of canon FD, Nikon and M42. Block for the fastening is made from anodized aluminum and weighs near [polukilogramma], and it is also equipped with four standard joints of 1/4 ″ - 20 female, which makes it possible to fasten entire construction to the usual support.
No comments: