NTT DoCoMo Develops and Tests Low-Power LSI Incorporating MIMO Signal-Processing Technology
— Another Milestone on the Road to Realizing Super 3G System —
R&D
TOKYO, JAPAN, September 13, 2007 --- NTT DoCoMo, Inc. announced today that it has developed and successfully tested a trial large-scale-integration (LSI) chip incorporating advanced power-saving signal-processing technologies that enable the chip to work at a sufficiently low power consumption and to be made small enough to fit into forthcoming Super 3G* handsets and beyond.
In the test, DoCoMo's LSI achieved a transmission rate of 200Mbps with high precision over a high-speed wireless network, while power consumption did not exceed 0.1W thanks to DoCoMo's proprietary signal-processing technology**.
The LSI demodulates and separates MIMO*** (multiple-input multiple-output) -multiplexed OFDM**** (orthogonal frequency division multiplexing) signals transmitted in the 20MHz bandwidth from four antennas. Signal processing is based on MLD (maximum likelihood detection) technology that DoCoMo has originally developed for 4G wireless access.
Redundant circuits have been eliminated in the experimental chip, which was made with 65 nanometer processing.
DoCoMo will continue to develop Super 3G and 4G technologies in combination with its LSI technology, as well as cooperate in the establishment of related international standards.
*Super 3G will provide superfast downlinks in excess of 100Mbps. Super 3G is called Long Term Evolution (LTE) in the 3rd Generation Partnership Project (3GPP).
**DoCoMo's proprietary signal-processing technology is based on MLD, the most accurate method available for separating MIMO-multiplexed signals. The MLD method separates MIMO-multiplexed signals by comparing the received signals and all possible signals to be transmitted to assess maximum likelihood. Although this guarantees accuracy it also requires very heavy computation, but DoCoMo's signal-processing technology reduces computation load while maintaining accuracy.
***MIMO uses multiple antennas on the same frequency to create different data streams that are multiplexed spatially.
****OFDM transmits fast data series using multiple sub-carriers in parallel. The method is especially robust in areas with multipath propagation, such as urban environments.
R&D
TOKYO, JAPAN, September 13, 2007 --- NTT DoCoMo, Inc. announced today that it has developed and successfully tested a trial large-scale-integration (LSI) chip incorporating advanced power-saving signal-processing technologies that enable the chip to work at a sufficiently low power consumption and to be made small enough to fit into forthcoming Super 3G* handsets and beyond.
In the test, DoCoMo's LSI achieved a transmission rate of 200Mbps with high precision over a high-speed wireless network, while power consumption did not exceed 0.1W thanks to DoCoMo's proprietary signal-processing technology**.
The LSI demodulates and separates MIMO*** (multiple-input multiple-output) -multiplexed OFDM**** (orthogonal frequency division multiplexing) signals transmitted in the 20MHz bandwidth from four antennas. Signal processing is based on MLD (maximum likelihood detection) technology that DoCoMo has originally developed for 4G wireless access.
Redundant circuits have been eliminated in the experimental chip, which was made with 65 nanometer processing.
DoCoMo will continue to develop Super 3G and 4G technologies in combination with its LSI technology, as well as cooperate in the establishment of related international standards.
*Super 3G will provide superfast downlinks in excess of 100Mbps. Super 3G is called Long Term Evolution (LTE) in the 3rd Generation Partnership Project (3GPP).
**DoCoMo's proprietary signal-processing technology is based on MLD, the most accurate method available for separating MIMO-multiplexed signals. The MLD method separates MIMO-multiplexed signals by comparing the received signals and all possible signals to be transmitted to assess maximum likelihood. Although this guarantees accuracy it also requires very heavy computation, but DoCoMo's signal-processing technology reduces computation load while maintaining accuracy.
***MIMO uses multiple antennas on the same frequency to create different data streams that are multiplexed spatially.
****OFDM transmits fast data series using multiple sub-carriers in parallel. The method is especially robust in areas with multipath propagation, such as urban environments.
Posts
No comments: